/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  */
/*  Latitude/longitude spherical geodesy formulae & scripts (c) Chris Veness 2002-2012            */
/*   - www.movable-type.co.uk/scripts/latlong.html                                                */
/*                                                                                                */
/*  Sample usage:                                                                                 */
/*    var p1 = new LatLon(51.5136, -0.0983);                                                      */
/*    var p2 = new LatLon(51.4778, -0.0015);                                                      */
/*    var dist = p1.distanceTo(p2);          // in km                                             */
/*    var brng = p1.bearingTo(p2);           // in degrees clockwise from north                   */
/*    ... etc                                                                                     */
/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  */

/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  */
/*  Note that minimal error checking is performed in this example code!                           */
/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  */


/**
 * @requires Geo
 */
 
 
/**
 * Creates a point on the earth's surface at the supplied latitude / longitude
 *
 * @constructor
 * @param {Number} lat: latitude in numeric degrees
 * @param {Number} lon: longitude in numeric degrees
 * @param {Number} [rad=6371]: radius of earth if different value is required from standard 6,371km
 */
function LatLon(lat, lon, rad) {
  if (typeof(rad) == 'undefined') rad = 6371;  // earth's mean radius in km
  // only accept numbers or valid numeric strings
  this._lat = typeof(lat)=='number' ? lat : typeof(lat)=='string' && lat.trim()!='' ? +lat : NaN;
  this._lon = typeof(lon)=='number' ? lon : typeof(lon)=='string' && lon.trim()!='' ? +lon : NaN;
  this._radius = typeof(rad)=='number' ? rad : typeof(rad)=='string' && trim(lon)!='' ? +rad : NaN;
}


/**
 * Returns the distance from this point to the supplied point, in km 
 * (using Haversine formula)
 *
 * from: Haversine formula - R. W. Sinnott, "Virtues of the Haversine",
 *       Sky and Telescope, vol 68, no 2, 1984
 *
 * @param   {LatLon} point: Latitude/longitude of destination point
 * @param   {Number} [precision=4]: no of significant digits to use for returned value
 * @returns {Number} Distance in km between this point and destination point
 */
LatLon.prototype.distanceTo = function(point, precision) {
  // default 4 sig figs reflects typical 0.3% accuracy of spherical model
  if (typeof precision == 'undefined') precision = 4;
  
  var R = this._radius;
  var lat1 = this._lat.toRad(), lon1 = this._lon.toRad();
  var lat2 = point._lat.toRad(), lon2 = point._lon.toRad();
  var dLat = lat2 - lat1;
  var dLon = lon2 - lon1;

  var a = Math.sin(dLat/2) * Math.sin(dLat/2) +
          Math.cos(lat1) * Math.cos(lat2) * 
          Math.sin(dLon/2) * Math.sin(dLon/2);
  var c = 2 * Math.atan2(Math.sqrt(a), Math.sqrt(1-a));
  var d = R * c;
  return d.toPrecisionFixed(precision);
}


/**
 * Returns the (initial) bearing from this point to the supplied point, in degrees
 *   see http://williams.best.vwh.net/avform.htm#Crs
 *
 * @param   {LatLon} point: Latitude/longitude of destination point
 * @returns {Number} Initial bearing in degrees from North
 */
LatLon.prototype.bearingTo = function(point) {
  var lat1 = this._lat.toRad(), lat2 = point._lat.toRad();
  var dLon = (point._lon-this._lon).toRad();

  var y = Math.sin(dLon) * Math.cos(lat2);
  var x = Math.cos(lat1)*Math.sin(lat2) -
          Math.sin(lat1)*Math.cos(lat2)*Math.cos(dLon);
  var brng = Math.atan2(y, x);
  
  return (brng.toDeg()+360) % 360;
}


/**
 * Returns final bearing arriving at supplied destination point from this point; the final bearing 
 * will differ from the initial bearing by varying degrees according to distance and latitude
 *
 * @param   {LatLon} point: Latitude/longitude of destination point
 * @returns {Number} Final bearing in degrees from North
 */
LatLon.prototype.finalBearingTo = function(point) {
  // get initial bearing from supplied point back to this point...
  var lat1 = point._lat.toRad(), lat2 = this._lat.toRad();
  var dLon = (this._lon-point._lon).toRad();

  var y = Math.sin(dLon) * Math.cos(lat2);
  var x = Math.cos(lat1)*Math.sin(lat2) -
          Math.sin(lat1)*Math.cos(lat2)*Math.cos(dLon);
  var brng = Math.atan2(y, x);
          
  // ... & reverse it by adding 180°
  return (brng.toDeg()+180) % 360;
}


/**
 * Returns the midpoint between this point and the supplied point.
 *   see http://mathforum.org/library/drmath/view/51822.html for derivation
 *
 * @param   {LatLon} point: Latitude/longitude of destination point
 * @returns {LatLon} Midpoint between this point and the supplied point
 */
LatLon.prototype.midpointTo = function(point) {
  lat1 = this._lat.toRad(), lon1 = this._lon.toRad();
  lat2 = point._lat.toRad();
  var dLon = (point._lon-this._lon).toRad();

  var Bx = Math.cos(lat2) * Math.cos(dLon);
  var By = Math.cos(lat2) * Math.sin(dLon);

  lat3 = Math.atan2(Math.sin(lat1)+Math.sin(lat2),
                    Math.sqrt( (Math.cos(lat1)+Bx)*(Math.cos(lat1)+Bx) + By*By) );
  lon3 = lon1 + Math.atan2(By, Math.cos(lat1) + Bx);
  lon3 = (lon3+3*Math.PI) % (2*Math.PI) - Math.PI;  // normalise to -180..+180º
  
  return new LatLon(lat3.toDeg(), lon3.toDeg());
}


/**
 * Returns the destination point from this point having travelled the given distance (in km) on the 
 * given initial bearing (bearing may vary before destination is reached)
 *
 *   see http://williams.best.vwh.net/avform.htm#LL
 *
 * @param   {Number} brng: Initial bearing in degrees
 * @param   {Number} dist: Distance in km
 * @returns {LatLon} Destination point
 */
LatLon.prototype.destinationPoint = function(brng, dist) {
  dist = typeof(dist)=='number' ? dist : typeof(dist)=='string' && dist.trim()!='' ? +dist : NaN;
  dist = dist/this._radius;  // convert dist to angular distance in radians
  brng = brng.toRad();  // 
  var lat1 = this._lat.toRad(), lon1 = this._lon.toRad();

  var lat2 = Math.asin( Math.sin(lat1)*Math.cos(dist) + 
                        Math.cos(lat1)*Math.sin(dist)*Math.cos(brng) );
  var lon2 = lon1 + Math.atan2(Math.sin(brng)*Math.sin(dist)*Math.cos(lat1), 
                               Math.cos(dist)-Math.sin(lat1)*Math.sin(lat2));
  lon2 = (lon2+3*Math.PI) % (2*Math.PI) - Math.PI;  // normalise to -180..+180º

  return new LatLon(lat2.toDeg(), lon2.toDeg());
}


/**
 * Returns the point of intersection of two paths defined by point and bearing
 *
 *   see http://williams.best.vwh.net/avform.htm#Intersection
 *
 * @param   {LatLon} p1: First point
 * @param   {Number} brng1: Initial bearing from first point
 * @param   {LatLon} p2: Second point
 * @param   {Number} brng2: Initial bearing from second point
 * @returns {LatLon} Destination point (null if no unique intersection defined)
 */
LatLon.intersection = function(p1, brng1, p2, brng2) {
  brng1 = typeof brng1 == 'number' ? brng1 : typeof brng1 == 'string' && trim(brng1)!='' ? +brng1 : NaN;
  brng2 = typeof brng2 == 'number' ? brng2 : typeof brng2 == 'string' && trim(brng2)!='' ? +brng2 : NaN;
  lat1 = p1._lat.toRad(), lon1 = p1._lon.toRad();
  lat2 = p2._lat.toRad(), lon2 = p2._lon.toRad();
  brng13 = brng1.toRad(), brng23 = brng2.toRad();
  dLat = lat2-lat1, dLon = lon2-lon1;
  
  dist12 = 2*Math.asin( Math.sqrt( Math.sin(dLat/2)*Math.sin(dLat/2) + 
    Math.cos(lat1)*Math.cos(lat2)*Math.sin(dLon/2)*Math.sin(dLon/2) ) );
  if (dist12 == 0) return null;
  
  // initial/final bearings between points
  brngA = Math.acos( ( Math.sin(lat2) - Math.sin(lat1)*Math.cos(dist12) ) / 
    ( Math.sin(dist12)*Math.cos(lat1) ) );
  if (isNaN(brngA)) brngA = 0;  // protect against rounding
  brngB = Math.acos( ( Math.sin(lat1) - Math.sin(lat2)*Math.cos(dist12) ) / 
    ( Math.sin(dist12)*Math.cos(lat2) ) );
  
  if (Math.sin(lon2-lon1) > 0) {
    brng12 = brngA;
    brng21 = 2*Math.PI - brngB;
  } else {
    brng12 = 2*Math.PI - brngA;
    brng21 = brngB;
  }
  
  alpha1 = (brng13 - brng12 + Math.PI) % (2*Math.PI) - Math.PI;  // angle 2-1-3
  alpha2 = (brng21 - brng23 + Math.PI) % (2*Math.PI) - Math.PI;  // angle 1-2-3
  
  if (Math.sin(alpha1)==0 && Math.sin(alpha2)==0) return null;  // infinite intersections
  if (Math.sin(alpha1)*Math.sin(alpha2) < 0) return null;       // ambiguous intersection
  
  //alpha1 = Math.abs(alpha1);
  //alpha2 = Math.abs(alpha2);
  // ... Ed Williams takes abs of alpha1/alpha2, but seems to break calculation?
  
  alpha3 = Math.acos( -Math.cos(alpha1)*Math.cos(alpha2) + 
                       Math.sin(alpha1)*Math.sin(alpha2)*Math.cos(dist12) );
  dist13 = Math.atan2( Math.sin(dist12)*Math.sin(alpha1)*Math.sin(alpha2), 
                       Math.cos(alpha2)+Math.cos(alpha1)*Math.cos(alpha3) )
  lat3 = Math.asin( Math.sin(lat1)*Math.cos(dist13) + 
                    Math.cos(lat1)*Math.sin(dist13)*Math.cos(brng13) );
  dLon13 = Math.atan2( Math.sin(brng13)*Math.sin(dist13)*Math.cos(lat1), 
                       Math.cos(dist13)-Math.sin(lat1)*Math.sin(lat3) );
  lon3 = lon1+dLon13;
  lon3 = (lon3+3*Math.PI) % (2*Math.PI) - Math.PI;  // normalise to -180..+180º
  
  return new LatLon(lat3.toDeg(), lon3.toDeg());
}


/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  */

/**
 * Returns the distance from this point to the supplied point, in km, travelling along a rhumb line
 *
 *   see http://williams.best.vwh.net/avform.htm#Rhumb
 *
 * @param   {LatLon} point: Latitude/longitude of destination point
 * @returns {Number} Distance in km between this point and destination point
 */
LatLon.prototype.rhumbDistanceTo = function(point) {
  var R = this._radius;
  var lat1 = this._lat.toRad(), lat2 = point._lat.toRad();
  var dLat = (point._lat-this._lat).toRad();
  var dLon = Math.abs(point._lon-this._lon).toRad();
  
  var dPhi = Math.log(Math.tan(lat2/2+Math.PI/4)/Math.tan(lat1/2+Math.PI/4));
  var q = (isFinite(dLat/dPhi)) ? dLat/dPhi : Math.cos(lat1);  // E-W line gives dPhi=0
  
  // if dLon over 180° take shorter rhumb across anti-meridian:
  if (Math.abs(dLon) > Math.PI) {
    dLon = dLon>0 ? -(2*Math.PI-dLon) : (2*Math.PI+dLon);
  }
  
  var dist = Math.sqrt(dLat*dLat + q*q*dLon*dLon) * R; 
  
  return dist.toPrecisionFixed(4);  // 4 sig figs reflects typical 0.3% accuracy of spherical model
}

/**
 * Returns the bearing from this point to the supplied point along a rhumb line, in degrees
 *
 * @param   {LatLon} point: Latitude/longitude of destination point
 * @returns {Number} Bearing in degrees from North
 */
LatLon.prototype.rhumbBearingTo = function(point) {
  var lat1 = this._lat.toRad(), lat2 = point._lat.toRad();
  var dLon = (point._lon-this._lon).toRad();
  
  var dPhi = Math.log(Math.tan(lat2/2+Math.PI/4)/Math.tan(lat1/2+Math.PI/4));
  if (Math.abs(dLon) > Math.PI) dLon = dLon>0 ? -(2*Math.PI-dLon) : (2*Math.PI+dLon);
  var brng = Math.atan2(dLon, dPhi);
  
  return (brng.toDeg()+360) % 360;
}

/**
 * Returns the destination point from this point having travelled the given distance (in km) on the 
 * given bearing along a rhumb line
 *
 * @param   {Number} brng: Bearing in degrees from North
 * @param   {Number} dist: Distance in km
 * @returns {LatLon} Destination point
 */
LatLon.prototype.rhumbDestinationPoint = function(brng, dist) {
  var R = this._radius;
  var d = parseFloat(dist)/R;  // d = angular distance covered on earth’s surface
  var lat1 = this._lat.toRad(), lon1 = this._lon.toRad();
  brng = brng.toRad();

  var dLat = d*Math.cos(brng);
  // nasty kludge to overcome ill-conditioned results around parallels of latitude:
  if (Math.abs(dLat) < 1e-10) dLat = 0; // dLat < 1 mm
  
  var lat2 = lat1 + dLat;
  var dPhi = Math.log(Math.tan(lat2/2+Math.PI/4)/Math.tan(lat1/2+Math.PI/4));
  var q = (isFinite(dLat/dPhi)) ? dLat/dPhi : Math.cos(lat1);  // E-W line gives dPhi=0
  var dLon = d*Math.sin(brng)/q;
  
  // check for some daft bugger going past the pole, normalise latitude if so
  if (Math.abs(lat2) > Math.PI/2) lat2 = lat2>0 ? Math.PI-lat2 : -Math.PI-lat2;
  
  lon2 = (lon1+dLon+3*Math.PI)%(2*Math.PI) - Math.PI;
 
  return new LatLon(lat2.toDeg(), lon2.toDeg());
}

/**
 * Returns the loxodromic midpoint (along a rhumb line) between this point and the supplied point.
 *   see http://mathforum.org/kb/message.jspa?messageID=148837
 *
 * @param   {LatLon} point: Latitude/longitude of destination point
 * @returns {LatLon} Midpoint between this point and the supplied point
 */
LatLon.prototype.rhumbMidpointTo = function(point) {
  lat1 = this._lat.toRad(), lon1 = this._lon.toRad();
  lat2 = point._lat.toRad(), lon2 = point._lon.toRad();
  
  if (Math.abs(lon2-lon1) > Math.PI) lon1 += 2*Math.PI; // crossing anti-meridian
  
  var lat3 = (lat1+lat2)/2;
  var f1 = Math.tan(Math.PI/4 + lat1/2);
  var f2 = Math.tan(Math.PI/4 + lat2/2);
  var f3 = Math.tan(Math.PI/4 + lat3/2);
  var lon3 = ( (lon2-lon1)*Math.log(f3) + lon1*Math.log(f2) - lon2*Math.log(f1) ) / Math.log(f2/f1);
  
  if (!isFinite(lon3)) lon3 = (lon1+lon2)/2; // parallel of latitude
  
  lon3 = (lon3+3*Math.PI) % (2*Math.PI) - Math.PI;  // normalise to -180..+180º
  
  return new LatLon(lat3.toDeg(), lon3.toDeg());
}


/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  */


/**
 * Returns the latitude of this point; signed numeric degrees if no format, otherwise format & dp 
 * as per Geo.toLat()
 *
 * @param   {String} [format]: Return value as 'd', 'dm', 'dms'
 * @param   {Number} [dp=0|2|4]: No of decimal places to display
 * @returns {Number|String} Numeric degrees if no format specified, otherwise deg/min/sec
 */
LatLon.prototype.lat = function(format, dp) {
  if (typeof format == 'undefined') return this._lat;
  
  return Geo.toLat(this._lat, format, dp);
}

/**
 * Returns the longitude of this point; signed numeric degrees if no format, otherwise format & dp 
 * as per Geo.toLon()
 *
 * @param   {String} [format]: Return value as 'd', 'dm', 'dms'
 * @param   {Number} [dp=0|2|4]: No of decimal places to display
 * @returns {Number|String} Numeric degrees if no format specified, otherwise deg/min/sec
 */
LatLon.prototype.lon = function(format, dp) {
  if (typeof format == 'undefined') return this._lon;
  
  return Geo.toLon(this._lon, format, dp);
}

/**
 * Returns a string representation of this point; format and dp as per lat()/lon()
 *
 * @param   {String} [format]: Return value as 'd', 'dm', 'dms'
 * @param   {Number} [dp=0|2|4]: No of decimal places to display
 * @returns {String} Comma-separated latitude/longitude
 */
LatLon.prototype.toString = function(format, dp) {
  if (typeof format == 'undefined') format = 'dms';
  
  return Geo.toLat(this._lat, format, dp) + ', ' + Geo.toLon(this._lon, format, dp);
}

/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  */

// ---- extend Number object with methods for converting degrees/radians

/** Converts numeric degrees to radians */
if (typeof Number.prototype.toRad == 'undefined') {
  Number.prototype.toRad = function() {
    return this * Math.PI / 180;
  }
}

/** Converts radians to numeric (signed) degrees */
if (typeof Number.prototype.toDeg == 'undefined') {
  Number.prototype.toDeg = function() {
    return this * 180 / Math.PI;
  }
}

/** 
 * Formats the significant digits of a number, using only fixed-point notation (no exponential)
 * 
 * @param   {Number} precision: Number of significant digits to appear in the returned string
 * @returns {String} A string representation of number which contains precision significant digits
 */
if (typeof Number.prototype.toPrecisionFixed == 'undefined') {
  Number.prototype.toPrecisionFixed = function(precision) {
    
    // use standard toPrecision method
    var n = this.toPrecision(precision);
    
    // ... but replace +ve exponential format with trailing zeros
    n = n.replace(/(.+)e\+(.+)/, function(n, sig, exp) {
      sig = sig.replace(/\./, '');       // remove decimal from significand
      l = sig.length - 1;
      while (exp-- > l) sig = sig + '0'; // append zeros from exponent
      return sig;
    });
    
    // ... and replace -ve exponential format with leading zeros
    n = n.replace(/(.+)e-(.+)/, function(n, sig, exp) {
      sig = sig.replace(/\./, '');       // remove decimal from significand
      while (exp-- > 1) sig = '0' + sig; // prepend zeros from exponent
      return '0.' + sig;
    });
    
    return n;
  }
}

/** Trims whitespace from string (q.v. blog.stevenlevithan.com/archives/faster-trim-javascript) */
if (typeof String.prototype.trim == 'undefined') {
  String.prototype.trim = function() {
    return String(this).replace(/^\s\s*/, '').replace(/\s\s*$/, '');
  }
}


/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  */
if (!window.console) window.console = { log: function() {} };

/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  */
/*  Geodesy representation conversion functions (c) Chris Veness 2002-2012                        */
/*   - www.movable-type.co.uk/scripts/latlong.html                                                */
/*                                                                                                */
/*  Sample usage:                                                                                 */
/*    var lat = Geo.parseDMS('51° 28′ 40.12″ N');                                                 */
/*    var lon = Geo.parseDMS('000° 00′ 05.31″ W');                                                */
/*    var p1 = new LatLon(lat, lon);                                                              */
/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  */


var Geo = {};  // Geo namespace, representing static class


/**
 * Parses string representing degrees/minutes/seconds into numeric degrees
 *
 * This is very flexible on formats, allowing signed decimal degrees, or deg-min-sec optionally
 * suffixed by compass direction (NSEW). A variety of separators are accepted (eg 3º 37' 09"W) 
 * or fixed-width format without separators (eg 0033709W). Seconds and minutes may be omitted. 
 * (Note minimal validation is done).
 *
 * @param   {String|Number} dmsStr: Degrees or deg/min/sec in variety of formats
 * @returns {Number} Degrees as decimal number
 * @throws  {TypeError} dmsStr is an object, perhaps DOM object without .value?
 */
Geo.parseDMS = function(dmsStr) {
  if (typeof deg == 'object') throw new TypeError('Geo.parseDMS - dmsStr is [DOM?] object');
  
  // check for signed decimal degrees without NSEW, if so return it directly
  if (typeof dmsStr === 'number' && isFinite(dmsStr)) return Number(dmsStr);
  
  // strip off any sign or compass dir'n & split out separate d/m/s
  var dms = String(dmsStr).trim().replace(/^-/,'').replace(/[NSEW]$/i,'').split(/[^0-9.,]+/);
  if (dms[dms.length-1]=='') dms.splice(dms.length-1);  // from trailing symbol
  
  if (dms == '') return NaN;
  
  // and convert to decimal degrees...
  switch (dms.length) {
    case 3:  // interpret 3-part result as d/m/s
      var deg = dms[0]/1 + dms[1]/60 + dms[2]/3600; 
      break;
    case 2:  // interpret 2-part result as d/m
      var deg = dms[0]/1 + dms[1]/60; 
      break;
    case 1:  // just d (possibly decimal) or non-separated dddmmss
      var deg = dms[0];
      // check for fixed-width unseparated format eg 0033709W
      //if (/[NS]/i.test(dmsStr)) deg = '0' + deg;  // - normalise N/S to 3-digit degrees
      //if (/[0-9]{7}/.test(deg)) deg = deg.slice(0,3)/1 + deg.slice(3,5)/60 + deg.slice(5)/3600; 
      break;
    default:
      return NaN;
  }
  if (/^-|[WS]$/i.test(dmsStr.trim())) deg = -deg; // take '-', west and south as -ve
  return Number(deg);
}


/**
 * Convert decimal degrees to deg/min/sec format
 *  - degree, prime, double-prime symbols are added, but sign is discarded, though no compass
 *    direction is added
 *
 * @private
 * @param   {Number} deg: Degrees
 * @param   {String} [format=dms]: Return value as 'd', 'dm', 'dms'
 * @param   {Number} [dp=0|2|4]: No of decimal places to use - default 0 for dms, 2 for dm, 4 for d
 * @returns {String} deg formatted as deg/min/secs according to specified format
 * @throws  {TypeError} deg is an object, perhaps DOM object without .value?
 */
Geo.toDMS = function(deg, format, dp) {
  if (typeof deg == 'object') throw new TypeError('Geo.toDMS - deg is [DOM?] object');
  if (isNaN(deg)) return null;  // give up here if we can't make a number from deg
  
    // default values
  if (typeof format == 'undefined') format = 'dms';
  if (typeof dp == 'undefined') {
    switch (format) {
      case 'd': dp = 4; break;
      case 'dm': dp = 2; break;
      case 'dms': dp = 0; break;
      default: format = 'dms'; dp = 0;  // be forgiving on invalid format
    }
  }
  
  deg = Math.abs(deg);  // (unsigned result ready for appending compass dir'n)
  
  switch (format) {
    case 'd':
      d = deg.toFixed(dp);     // round degrees
      if (d<100) d = '0' + d;  // pad with leading zeros
      if (d<10) d = '0' + d;
      dms = d + '\u00B0';      // add º symbol
      break;
    case 'dm':
      var min = (deg*60).toFixed(dp);  // convert degrees to minutes & round
      var d = Math.floor(min / 60);    // get component deg/min
      var m = (min % 60).toFixed(dp);  // pad with trailing zeros
      if (d<100) d = '0' + d;          // pad with leading zeros
      if (d<10) d = '0' + d;
      if (m<10) m = '0' + m;
      dms = d + '\u00B0' + m + '\u2032';  // add º, ' symbols
      break;
    case 'dms':
      var sec = (deg*3600).toFixed(dp);  // convert degrees to seconds & round
      var d = Math.floor(sec / 3600);    // get component deg/min/sec
      var m = Math.floor(sec/60) % 60;
      var s = (sec % 60).toFixed(dp);    // pad with trailing zeros
      if (d<100) d = '0' + d;            // pad with leading zeros
      if (d<10) d = '0' + d;
      if (m<10) m = '0' + m;
      if (s<10) s = '0' + s;
      dms = d + '\u00B0' + m + '\u2032' + s + '\u2033';  // add º, ', " symbols
      break;
  }
  
  return dms;
}


/**
 * Convert numeric degrees to deg/min/sec latitude (suffixed with N/S)
 *
 * @param   {Number} deg: Degrees
 * @param   {String} [format=dms]: Return value as 'd', 'dm', 'dms'
 * @param   {Number} [dp=0|2|4]: No of decimal places to use - default 0 for dms, 2 for dm, 4 for d
 * @returns {String} Deg/min/seconds
 */
Geo.toLat = function(deg, format, dp) {
  var lat = Geo.toDMS(deg, format, dp);
  return lat==null ? '–' : lat.slice(1) + (deg<0 ? 'S' : 'N');  // knock off initial '0' for lat!
}


/**
 * Convert numeric degrees to deg/min/sec longitude (suffixed with E/W)
 *
 * @param   {Number} deg: Degrees
 * @param   {String} [format=dms]: Return value as 'd', 'dm', 'dms'
 * @param   {Number} [dp=0|2|4]: No of decimal places to use - default 0 for dms, 2 for dm, 4 for d
 * @returns {String} Deg/min/seconds
 */
Geo.toLon = function(deg, format, dp) {
  var lon = Geo.toDMS(deg, format, dp);
  return lon==null ? '–' : lon + (deg<0 ? 'W' : 'E');
}


/**
 * Convert numeric degrees to deg/min/sec as a bearing (0º..360º)
 *
 * @param   {Number} deg: Degrees
 * @param   {String} [format=dms]: Return value as 'd', 'dm', 'dms'
 * @param   {Number} [dp=0|2|4]: No of decimal places to use - default 0 for dms, 2 for dm, 4 for d
 * @returns {String} Deg/min/seconds
 */
Geo.toBrng = function(deg, format, dp) {
  deg = (Number(deg)+360) % 360;  // normalise -ve values to 180º..360º
  var brng =  Geo.toDMS(deg, format, dp);
  return brng==null ? '–' : brng.replace('360', '0');  // just in case rounding took us up to 360º!
}


/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  */
if (!window.console) window.console = { log: function() {} };
