{{code}}

Ambiguous, could also be
{{resistance_alt|format_prefix}}Ω (EIA-96)

{{electrolytic_display}} {{electrolytic_display_tol}}

{{capacitance_electrolytic|format_prefix}}F 
±{{tol_electrolytic}}% ({{capacitance_electrolytic - capacitance_electrolytic * tol_electrolytic *0.01|format_prefix}}F - {{capacitance_electrolytic + capacitance_electrolytic * tol_electrolytic *0.01|format_prefix}}F)

Capacitor Code:

Tolerance: (Empty) M (±20%) K (±10%) J (±5%) G (±2%)

 

Electrolytic capacitance is normally directly specified in µF (micro-Farad) but may also be specified with as MF (M here means micro, not tolerance).
Tolerance is normally in the range of ±20% if not specified

{{ceramic_display}}

{{capacitance_ceramic|format_prefix}}F 
±{{tol_ceramic}}% ({{capacitance_ceramic - capacitance_ceramic * tol_ceramic *0.01|format_prefix}}F - {{capacitance_ceramic + capacitance_ceramic * tol_ceramic *0.01|format_prefix}}F)

 

Ceramic disk capacitors are normally expressed as 3 digit number codes, the first two digits are the base and the third digit the multiplier (pF). This may be followed by a letter indicating the tolerance.
If only one or two digits is visible the value is in pF.